Mellanox Compatible: | MMA1L10-CR | Vendor Name: | Fibercoms | Form Factor: | QSFP28 |
Max Data Rate: | 103.1Gbps | Wavelength: | 1295.56nm, 1300.05nm 130409.58nm, 13.14nm | Max Distance: | 10km |
Connector: | Duplex LC | Cable Type: | SMF | Supply Voltage: | 3.3V |
Transmitter Type: | LAN WDM DFB | Receiver Type: | PIN | DDM Support: | Yes |
Operation Temperature: | 0 to 70°C (32 to 158°F) | Protocols: | 100G Ethernet, MSA Compliant | Warranty: | 3 Years |
The 100G QSFP28 LR4 Transceiver is a 4-channel pluggableQSFP28 optical transceiver designed for 100Gigabit Ethernet (GbE) links with up to10km reach on a single mode fiber. This transceiver can be used in both 40 GbE and 100 GbE applications. Digital Diagnostic Functions are available via the I2C interface, as specified by the QSFP28 MSA. It is compliant with the QSFP28 MSA, IEEE 802.3ba 100GBASE-LR4 and IEEE 802.3bm CAUI-4.
Absolute Maximum Specifications
Parameter | Symbol | Min | Max | Units |
Storage Temperature | Ts | -40 | 85 |
°C
|
Operating Case Temperature | Top | 0 | 70 |
°C
|
Maximum Supply Voltage | Vcc | -0.5 | 3.6 | V |
Relative Humidity (non-condensing) | RH | 15 | 85 | % |
Damage Threshold, each lane | THd | 5.5 | - | dBm |
Optical Specifications
Parameter | Symbol | Min | Typ | Max | Units | Notes |
Signaling Speed per Lane
|
25.78125± 100 ppm | Gb/s | 1 | |||
Lane Wavelength | L0 | 1294.53 | - | 1296.59 | nm | |
L1 | 1299.02 | - | 1301.09 | nm | ||
L2 | 1303.54 | - | 1305.63 | nm | ||
L3 | 1308.09 | - | 1310.19 | nm | ||
Transmitter | ||||||
Sidemode Suppersion Ratio(SMSR) |
SMSR | 30 | - | - | dB | |
Total Average Launch Power | PT | - | - | 10.5 | dBm | |
Average Launch Power, each Lane | PAVG | -4.3 | 4.5 | dBm | 2,7 | |
Optical Modulation Amplitude(OMA), each Lane | POMA | -1.3 | - | 4.5 | dBm | |
Extinction Ratio | ER | 4 | - | - | dB | |
Relative Intensity Noise(RIN) | RIN | - | - | -130 | dB/Hz | |
Optical Return Loss Tolerance | ORLT | - | - | 20 | dB | |
Transmitter Reflectance
|
RT | - | - | -12 | dB | |
Eye Mask {X1, X2, X3, Y1, Y2, Y3}
|
{0.25, 0.4, 0.45, 0.25, 0.28, 0.4}
|
3 | ||||
Average Launch Power OFF
Transmitter, each Lane
|
POFF | - | - | -30 | dBm | |
Receiver | ||||||
Signaling Speed per Lane |
25.78125 ± 100 ppm
|
GBd | 4 | |||
Receiver Power(OMA), each Lane | - | - | - | 4.5 | dBm | |
Average Receiver Power per Lane | PXPx | -10.6 | - | 4.5 | dBm | 5,7 |
Receiver Sensitivity(OMA), each Lane | SEN | - | - | -8.6 | dBm | |
stressed Receiver Sensitivity (OMA), each Lane | - | - | -6.8 | dBm | 6 | |
LOS De-Assert | LOSD | - | - | -11.6 | dBm | |
LOS Assert | LOSA | - | - | -13.6 | dBm | |
LOS Hysteresis | LOSH | - | 1.5 | - | dBm |
Notes:
2. Minimum value is informative.
3. Hit ratio 5x10-5 .
4. Minimum value is informative, equals min Tx OMA with infinite ER and max channel insertionloss.
5. SRS is measured with vertical eye closure penalty of 1.8 dB max, J2 of 0.30 UI, and J9 of 0.47 UI.
6. Power value and power accuracy are with all channels enabled.
Key Features:
(SMF)
Single +3.3V supply
Operating case temperature of 0-70ºC
Duplex LC/UPC optical I/F
RoHS compliant
SFF-8636 compliant DDM functions
Applications:
Shenzhen Fibercoms Co., Ltd
Phone:
86-18692697905
Email:
[email protected]
Address:
Hubei road, Dongmen Street, Luohu District, Shenzhen, China