[email protected]
86-18692697905
English
English
| Mellanox Compatible: | MMA1L30-CM | Vendor Name: | Fibercoms | Form Factor: | QSFP28 |
| Max Data Rate: | 103.1Gbps | Wavelength: | 1271nm, 1291nm 1311nm, 1331nm | Max Distance: | 2km |
| Connector: | Duplex LC | Cable Type: | SMF | Transmitter Type: | CWDM DFB |
| Receiver Type: | PIN | Operation Temperature: | 0 to 70°C (32 to 158°F) | Protocols: | 100G Ethernet, MSA Compliant |
| Supply Voltage: | 3.3V | DDM Support: | Yes | Warranty: | 3 Years |
The 100G QSFP28 CWDM4 Transceiver is a single mode 4- channel (CWDM4), QSFP28 optical transceiver designed for use in 100 Gigabit Ethernet links on up to 2km of single mode fiber via duplex LC/UPC connector. It is can be used in both 40 GbE and 100 GbE applications. It is compliant with CWDM4 MSA Standard.
Absolute Maximum Specifications
| Parameter | Symbol | Min | Max | Units |
| Storage Temperature | Ts | -40 | 85 |
°C
|
| Operating Case Temperature | Top | 0 | 70 |
°C
|
| Maximum Supply Voltage | Vcc | -0.5 | 3.6 | V |
| Relative Humidity (non-condensing) | RH-Option 1 | 5 | 95 | % |
| RH-Option 2 | 15 | 85 | % | |
| Control Input Voltage | V1 | -0.3 |
Vcc+0.5
|
V |
| Io | -20 | 20 | mA |
Optical Specifications
| Parameter | Symbol | Min | Typical | Max | Units | Notes |
| Signaling Speed per Lane |
25.78125 ± 100 ppm
|
Gb/s | 1 | |||
| Lane Wavelength | L0 | 1294.53 | - | 1296.59 | nm | |
| L1 | 1299.02 | - | 1301.09 | nm | ||
| L2 | 1303.54 | - | 1305.63 | nm | ||
| L3 | 1308.09 | - | 1310.19 | nm | ||
| Transmitter | ||||||
| Sidemode Suppersion Ratio (SMSR) | SMSR | 30 | - | - | dB | |
| Total Average Launch Power | PT | - | - | 10.5 | dBm | |
| Average Launch Power, each lane | PAVG | -4.3 | 4.5 | dBm | 2,7 | |
| Optical Modulation Amplitude(OMA), each lane | POMA | -1.3 | - | 4.5 | dBm | |
| Extinction Ratio | ER | 4 | - | - | dB | |
| Relative Intensity Noise | RIN | - | - | -130 | dB/Hz | |
| Optical Return Loss Tolerance | ORLT | - | - | 20 | dB | |
| Transmitter Reflectance | RT | - | - | -12 | dB | |
| Eye Mask {X1,X2,X3,Y1,Y2,Y3} | {0.25, 0.4, 0.45, 0.25, 0.28, 0.4} | 3 | ||||
| Average Launch Power OFF Transmitter, each Lane | POFF | - | - | -30 | dBm | |
| Receiver | ||||||
| Signaling Speed per Lane | 25.78125 ± 100 ppm | GBd | 4 | |||
| Receive Power(OMA), each Lane | - | - | - | 4.5 | dBm | |
| Average Receive Power per Lane | RXPx | -10.6 | - | 4.5 | dBm | 5,7 |
| Receiver Sensitivity(OMA), each Lane | SEN | - | - | -8.6 | dBm | |
| Stressed Receiver Sensitivity(OMA), each Lane | - | - | -6.8 | dBm | 6 | |
| LOS De-Assert | LOSD | - | - | -11.6 | dBm | |
| LOS Assert | LOSA | - | - | -13.6 | dBm | |
| LOS Hysteresis | LOSH | - | 1.5 | - | dBm | |
Notes:
2. Minimum value is informative.
3. Hit ratio 5x10-5 .
4. Minimum value is informative, equals min Tx OMA with infinite ER and max channel insertion loss.
5. SRS is measured with vertical eye closure penalty of 1.8 dB max, J2 of 0.30 UI, and J9 of 0.47 UI.
6. Power value and power accuracy are with all channels enabled.
Key Features:
Up to 100Gb/s data rate
Up to 2km reach on Single Mode Fiber at 100Gb/s
Single 3.3V supply
Hot Pluggable
Operating case temperature of 0-70ºC
Duplex LC connector
RoHS compliant
Shenzhen Fibercoms Co., Ltd
Phone:
86-18692697905
Email:
[email protected]
Address:
Hubei road, Dongmen Street, Luohu District, Shenzhen, China
