[email protected]
86-18692697905
English
English
| Mellanox Compatible: | MMS1V70-CM | Vendor Name: | Fibercoms | Form Factor: | QSFP28 |
| Max Data Rate: | 103.125Gbps | Wavelength: | 1310nm | Max Distance: | 500m |
| Connector: | Duplex LC | Cable Type: | SMF | Transmitter Type: | EML |
| Receiver Type: | PIN | Supply Voltage: | 3.3V | DOM Support: | Yes |
| Operation Temperature: | 0 to 70°C (32 to 158°F) | Protocols: | IEEE 802.3cd 100GBASE-DR | Warranty: | 3 Years |
The 100G QSFP28 DR1 Single Lambda Transceiver is designed for use in 100 Gigabit Ethernet links on up to 500m of single mode fiber using a wavelength of 1310nm via duplex LC connectors. This transceiver can be used in Data Center and 100G Ethernet. Digital diagnostic functions are available via the I2C interface, as specified by the QSFP28 MSA. It is compliant with the QSFP28 MSA, IEEE 802.3bm CAUI-4.
Absolute Maximum Specifications
| Parameter | Symbol | Min | Max | Units |
| Storage Temperature | Ts | -40 | +85 |
ºC
|
| Supply Voltage | Vcc | -0.3 | 3.6 | V |
| Relative Humidity (non-condensing) | RH | 5 | 95 | % |
| Data Input Voltage- Differential |
lVDIP-VDINl
|
- | 1.0 | V |
| Control Input Voltage | VI | -0.3 | Vcc +0.5 | V |
| Control Output Current | IO | -20 | 20 | mA |
Optical Transmitter Specifications
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
| Wavelength | λC | 1304.5 | 1311 | 1317.5 | nm | |
| Side mode suppression ratio | SMSR | 30 | - | - | dB | |
| Average Optical Launch Power | POUT | -2.9 | - | 4 | dBm | |
| Average Launch Power Tx_Off | POUT_OFF | - | - | -15 | dBm | |
| Extiction Ratio | ER | 3.5 | - | - | dB | |
| Outer Optical Modulation Amplitude | OMAouter | -0.8 | - | 4.2 | dBm | |
| Launch Power in OMAouter minus TDECQ for ER ≥ 5dB |
OMAouter-TDECQ |
-2.2 | - | - | dBm | |
| Launch Power in OMAouter minus TDECQ for ER < 5dB |
OMAouter-TDECQ |
-1.9 | - | - | dBm | |
| Transmitter and dispersion eye closure | TDECQ | - | - | 3.4 | dB | |
| TDECQ-10log10(Ceq) | - | - | 3.4 | dB | ||
| Transmitter transition time | TTx | - | - | 17 | ps | |
| RIN15.5OMA | RIN | - | - | -136 | dB/Hz | |
| Optical return loss tolerance | ORLT | - | - | 15.5 | dB | |
| Transmitter reflectance | TR | - | - | -26 | dB |
Optical Receiver Specifications
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
| Wavelength | λC | 1304.5 | 1311 | 1317.5 | nm | |
| Damage Threshold | 5 | - | - | dBm | ||
| Average receive power | -5.9 | - | 4 | dBm | ||
| Receive power (OMAouter) | RP | - | - | 4.2 | dBm | |
| Receiver reflectance | RR | - | - | -26 | dB | |
| Receiver sensitivity (OMAouter) | RS | max(-3.9, SECQ-5.3) | dBm | |||
| Stressed receiver sensitivity | SRS | - | - | -1.9 | dBm | |
| Stressed Receiver Sensitivity Test Conditions: | ||||||
| Stressed eye closure for PAM4 (SECQ) | SECQ | - | - | 3.4 | dB | |
| SECQ-10log10(Ceq) | - | - | 3.4 | dB | ||
Notes: Amplitude customization beyond these specs is dependent on validation in customer system.
Key features:
4x 25Gb/s NZR Modulation
Single 3.3V power supply
Up to 500m length
Hot pluggable
RoHS compliant
SFF-8636 compliant I2C management interface
Shenzhen Fibercoms Co., Ltd
Phone:
86-18692697905
Email:
[email protected]
Address:
Hubei road, Dongmen Street, Luohu District, Shenzhen, China
