[email protected]
86-18692697905
English
English
| NVIDIA Compatible: | MFA7U10-H00x | Vendor Name: | Fibercoms | Form Factor: | OSFP to 2x QSFP56 |
| Max Data Rate: | 400Gb/s to 2 x 200Gb/s | Wavelength: | 850nm | Cable Length: | 3m,5m,10m,15m,20m,30m |
| Cable Type: | MMF | DDM Support: | Yes | Modulation Format: | PAM4 |
| Cable Jacket: | LSZH | Transmitter Type: | 850nm VCSEL | Receiver Type: | PIN |
| Operating Case Temperature: | 0 to 70°C (32 to 158°F) | Protocols: | CMIS 4.0, SFF-8636 | Warranty: | 3 Years |
The 400Gb/s OSFP to 2x200Gb/s QSFP56 Active Optical Splitter Cable operates at Multi-Mode Fiebr(MMF) and designed for connecting NDR switch. This cable provides connectivity between system units with a OSFP 400Gb/s connector on one side and two separate QSFP56 200Gb/s connectors on the other side. It is compliant with CMIS 4.0 and SFF-8665. It provides high-performance and power-efficient connectivity solutions for data center interconnects.
Operational Specifications
This section shows the range of values for normal operation. The host board power supply filtering should be designed as recommended in the SFF Committee Spec.
| Parameter | Min. | Typ | Max | Units | Notes |
| Supply voltage(Vcc) | 3.135 | 3.3 | 3.465 | V | - |
| Power consumption 200Gb/s end | - | 4.35 | 4.5 | W | - |
| Power consumption 400Gb/s end | - | 9.0 | 10 | W | - |
| Supply noise tolerance (10Hz - 10MHz) | 66 | - | - | mVpp | - |
| Operating case temperature | 0 | - | 70 | °C | - |
| Operating relative humidity | 5 | - | 85 | % | - |
Electrical Specifications
| Parameter (per lane) | Min. | Typ | Max | Units |
| Signaling rate | -100 ppm | 26.5625 | +100 ppm | GBd |
| Differential data input swing at TP1a | TBD | - | 900 | mVpp |
| Differential data output swing at TP4 | - | - | 900 | mVpp |
| Near-end ESMW | 0.265 | - | - | UI |
| Near-end output eye height | 70 | - | - | mVpp |
| Output transition time, 20% to 80% | 9.5 | - | - | ps |
Notes:
Key Features：
Shenzhen Fibercoms Co., Ltd
Phone:
86-18692697905
Email:
[email protected]
Address:
Hubei road, Dongmen Street, Luohu District, Shenzhen, China
