[email protected]
86-18692697905
English
English
| Mellanox Compatible: | MMA1T00-HS | Vendor Name: | Fibercoms | Form Factor: | QSFP56 |
| Max Data Rate: | 212.5Gbps | Wavelength: | 850nm | Max Distance: | 70m on OM3/100m on OM4 |
| Connector: | MTP/MPO-12 | Cable Type: | MMF | Supply Voltage: | 3.3V |
| Modulation Format: | PAM4 | Host Required: | FEC | DDM Support: | Yes |
| Transmitter Type: | 850nm VCSEL | Receiver Type: | PIN | Operation Temperature: | 0 to 70°C (32 to 158°F) |
| Maximum Power: | < 5W | Protocols: | QSFP56 MSA, IEEE 802.3bs | Warranty: | 3 Years |
The 200Gb/s QSFP56 transceiver is a 4-channel, pluggable, QSFP56 optical transceiver operates over 4-lane parallel multi-mode fiber (MMF), using a nominal wavelength of 850nm. This transceiver is designed for use in 200Gb/s HDR InfiniBand applications. The built-in digital diagnostic monitoring (DDM) allows access to real-time operating parameters. It is fully compliant with QSFP56 MSA, IEEE 802.3bs standards.
Absolute Maximum Specifications
| Parameter | Min | Max | Units |
| Supply voltage | -0.3 | 3.6 | V |
| Data input voltage | -0.3 | 3.465 | V |
| Control input voltage | -0.3 | 4.0 | V |
| Damage threshold | 3.4 | - | dBm |
Optical Transmitter Specifications
| Parameter | Min | Typical | Max | Units |
| Signaling speed (with retiming) | -100 ppm | 26.5625 | +100 ppm | GBd |
| Center wavelength | 840 | 850 | 860 | nm |
| Spectral width | - | - | 0.6 | nm |
| Average launch power | -2.0 | - | 3.0 | dBm |
| Transmit OMA | -2.0 | - | 3.0 | dBm |
| Average launch power of off transmitter | - | - | -30 | dBm |
| Extinction ratio | 4.0 | - | 6.0 | dB |
| Transmitter reflectance tolerance | - | - | -12.0 | dB |
| Transmitter return loss | - | - | -18.0 | dB |
| Transmitter eye mask definition | - | |||
| Reach on OM3 multi-mode fiber | 100 | - | - | m |
Optical Receiver Specifications
| Parameter | Min | Typical | Max | Units |
| Signaling speed (with retiming) | -100 ppm | 26.5625 | +100 ppm | GBd |
| Center wavelength | 840 | 850 | 860 | nm |
| Receive damage threshold(AOP) | 5.0 | - | - | dBm |
| Unstressed receiver sensitivity (OMA) at BER= 10-6 | - | - | -5.0 | dBm |
| Receiver Reflectance | - | - | -18.0 | dB |
| LOS assert | - | - | -14 | dBm |
| LOS hysteresis | 0.5 | - | 3.0 | dB |
| Stressed receiver sensitivity(OMA) at BER= 10-4 | - | - | -3.0 | dBm |
| Conditions of stressed receiver sensitivity test | ||||
| SECQ (Stressed Eye Closure) penalty | - | - | 4.9 | dB |
| OMA of each aggressor lane | - | - | 3.0 | dB |
| Stressed eye mask definition | TBD | - | ||
Key Features
Shenzhen Fibercoms Co., Ltd
Phone:
86-18692697905
Email:
[email protected]
Address:
Hubei road, Dongmen Street, Luohu District, Shenzhen, China
