NVIDIA Compatible: | MFS1S00-HxxxV | Vendor Name: | Fibercoms | Connector Type: | QSFP56 to QSFP56 |
Max Data Rate: | 212.5Gb/s | Wavelength: | 850nm | Cable Length: | 3m-50m |
Cable Type: | MMF | Modulation Format: | DSP/PAM4 | DDM Support: | Yes |
Transmitter Type: | 850nm VCSEL | Receiver Type: | PIN | Operating Case Temperature: | 0 to 70°C (32 to 158°F) |
Protocols: | SFF-8636 and SFF-8679, IEEE 802.3cd | Warranty: | 3 Years | Application: | 200Gb InfiniBand HDR Systems |
The 200G QSFP56 active optical cable is designed for use in 200Gb/s InfiniBand HDR systems. It contains four multi-mode fibers (MMF) optic transceivers per end, each operating at data rates of up to 50Gb/s. It enables higher port bandwidth, density and configurability at a low cost and reduced power requirement in the data centers. It is compliant with SFF-8636 and SFF-8679, IEEE 802.3cd.
Absolute Maximum Specifications
Parameter | Min | Max | Units |
Supply voltage | -0.3 | 3.6 | V |
Data input voltage | -0.3 | 3.465 | V |
Control input voltage | -0.3 | 4.0 | V |
Damage Threshold | 3.4 | - | dBm |
Operational Specifications
Parameter | Min | Typ | Max | Units |
Supply voltage (Vcc) | 3.135 | 3.3 | 3.465 | V |
Power Dissipation (each end, retiming on all lanes) | - | 4.8 | 5.0 | W |
Supply noise tolerance (10Hz-10MHz) | 66 | - | - | mVpp |
Operating case temperature | 0 | - |
70 1
|
°C
|
Operating relative humidity | 5 | - | 85 | % |
Electrical Specifications
Parameter | Min | Typ | Max | Units |
Signaling rate | -100 ppm | 53.125 | +100 ppm | Gb/s (PAM4) |
-100 ppm | 25.78125 | +100 ppm | Gb/s (NZR) | |
Differential data input swing at TP1a | TBD | - | 900 | mVpp |
Differential data output swing at TP4 | - | - | 900 | mVpp |
Near-end ESMW | 0.265 | - | - | UI |
Near-end output eye height | 70 | - | - | mVpp |
Output transition time, 20% to 80% | 9.5 | - | - | ps |
Notes:
Shenzhen Fibercoms Co., Ltd
Phone:
86-18692697905
Email:
[email protected]
Address:
Hubei road, Dongmen Street, Luohu District, Shenzhen, China