[email protected]
86-18692697905
English
English
| Mellanox Compatible: | MCP7H50-H0xxRyy | Vendor Name: | Fibercoms | Form Factor: | 200G QSFP56 to 2xQSFP56 |
| Max Data Rate: | 200Gb/s | Cable Length: | 1m, 1.5m, 2m | Wire Gages: | 26AWG/30AWG |
| Jacket Material: | LSZH | Modulation Format: | PAM4 | Supply Voltage: | 3.3V |
| Operation Temperature: | 0 to 70°C (32 to 158°F) | Protocols: | IEEE 802.3cd, QSFP56 MSA | Application: | 200G Ethernet and InfiniBand HDR |
The 200Gb/s QSFP56 to 2x100Gb/s QSFP56 Breakout DAC cable is designed for use in 200Gb/s and 100Gb/s InfiniBand HDR applications. This cable provides connectivity between system units with a 200G QSFP56 port on one end and two 100G QSFP56 ports on the other. This cable solution provides efficient power connectivity, enabling data centers to achieve higher port bandwidth, density, and configurability at lower costs and reduced power consumption.
Absolute Maximum Specifications
| Parameter | Min | Max | Units |
| Supply voltage | -0.3 | 3.6 | V |
| Data input voltage | -0.3 | 3.6 | V |
| Control input voltage | -0.3 | 3.6 | V |
Operational Specifications
| Parameter | Min | Typ | Max | Units |
| Supply voltage (Vcc) | 3.135 | 3.3 | 3.465 | V |
| Power consumption | - | - | 0.1 | W |
| Operating case temperature | 0 | 70 |
°C
|
|
| Operating relative humidity | 5 | 85 | % |
Electrical Specifications
| Parameter | Min | Typ | Max | Units | Notes |
| Characteristic Impedance | 90 | 100 | 110 |
Ω
|
- |
| Time propagation delay | 4.5 | ns/m | Informative |
Note: Minimum insertion loss for up to 1m cable length is 6dB @ 12.89GHz.
Key Features:
200Gb/s to 2x100Gb/s data rate
Single 3.3V supply voltage
SFF-8665 compliant
Hot pluggable
RoHS compliant
SFF-8636 compliant I2C management interface
Shenzhen Fibercoms Co., Ltd
Phone:
86-18692697905
Email:
[email protected]
Address:
Hubei road, Dongmen Street, Luohu District, Shenzhen, China
