[email protected]
86-18692697905
English
English
| NVIDIA Compatible: | MFS1S90-H0xxE | Vendor Name: | Fibercoms | Form Factor: | 2x QSFP56 to 2x QSFP56 |
| Max Data Rate: | 212.5Gb/s | Wavelength: | 850nm | Cable Length: | 3m-30m |
| Cable Type: | MMF | Jacket Material: | LSZH | Modulation Format: | PAM4 |
| DDM Support: | Yes | Transmitter Type: | 850nm VCSEL | Receiver Type: | PIN |
| Voltage Supply: | 3.3V | Host Required: | FEC | Operation Temperature: | 0 to 70°C (32 to 158°F) |
| Protocols: | QSFP56 MSA, CMIS IEEE 802.3cd , 200GBASE-SR4 | Warranty: | 3 Years | Application: | 200G InfiniBand HDR, 200GBASE-SR4 |
The 2x200Gb/s QSFP56 to 2x200Gb/s QSFP56 Breakout active optical cable is designed for use in InfiniBand HDR (High Data Rate) systems. The cable enables a HDR InfiniBand QSFP56 switch port to operate as 2x HDR100. This cable solution provides efficient power connectivity, enabling data centers to achieve higher port bandwidth, density, and configurability at lower costs and reduced power consumption. This cable is compliant with QSFP-MSA and 200GBASE-SR4 specifications.
Absolute Maximum Specifications
| Parameter | Min | Max | Units |
| Supply voltage | -0.3 | 3.6 | V |
| Data input voltage | -0.3 | 3.465 | V |
| Control input voltage | -0.3 | 4.0 | V |
| Damage Threshold | 3.4 | - | dBm |
Operational Specifications
| Parameter | Min | Typ | Max | Units |
| Supply voltage (Vcc) | 3.135 | 3.3 | 3.465 | V |
| Power consumption 200Gb/s end | - | 4.5 | 5.0 | W |
| Supply noise tolerance (10Hz - 10MHz) | 66 | - | - | mVpp |
| Operating case temperature | 0 | - | 70 |
°C
|
| Operating relative humidity | 5 | - | 85 | % |
Electrical Specifications
| Parameter | Min | Typ | Max | Units |
| Signaling rate | - 100ppm | 53.125 | +100ppm | GBd |
| Differential data input swing at TP1a | TBD | - | 900 | mVpp |
| Differential data output swing at TP4 | - | - | 900 | mVpp |
| Near-end ESMW | 0.265 | - | - | UI |
| Near-end output eye height | 70 | - | - | mVpp |
| Output transition time, 20% to 80% | 9.5 | - | - | ps |
Notes:
1. Multiple clock domains are supported only on line-side Rx. Host side Rx supports a single clock domain only.
2. QSFP Tx CDR lock can only occur if Tx lane 4 is transmitting data.
Key Features:
2x 200Gb/s to 2x 200Gb/s data rate
4x 50Gb/s PAM4 modulation
SFF-8665 compliant QSFP56 port
Single 3.3V power supply
Up to 30m length
Hot pluggable
RoHS compliant
SFF-8636 compliant I2C management interface
Shenzhen Fibercoms Co., Ltd
Phone:
86-18692697905
Email:
[email protected]
Address:
Hubei road, Dongmen Street, Luohu District, Shenzhen, China
