[email protected]
86-18692697905
English
English
| NVIDIA Compatible: | MFS1S50-H0xxV | Vendor Name: | Fibercoms | Form Factor: | QSFP56 to 2x QSFP56 |
| Max Data Rate: | 212.5Gb/s | Cable Length: | 3m-30m | Wavelength: | 850nm |
| Cable Type: | MMF | Voltage Supply: | 3.3V | Modulation Format: | PAM4 |
| Jacket Material: | LSZH | DDM Support: | Yes | Host Required: | FEC |
| Transmitter Type: | 850nm VCSEL | Receiver Type: | PIN | Operation Temperature: | 0 to 70°C (32 to 158°F) |
| Protocols: | QSFP56 MSA, CMIS IEEE 802.3cd 200GBASE-SR4 | Warranty: | 3 Years | Application: | 200G InfiniBand HDR |
The 200Gb/s QSFP56 to 2x100Gb/s QSFP56 Breakout active optical cable is designed for use in 200Gb/s InfiniBand HDR (High Data Rate) systems. It provides connectivity between system units with a 200G QSFP56 port on one end and to two 100G QSFP56 ports on the other end. This cable solution provides efficient power connectivity, enabling data centers to achieve higher port bandwidth, density, and configurability at lower costs and reduced power consumption. It is compliant with IEEE 802.3, QSFP56 MSA, SFF-8024 ,SFF-8665 and SFF-8636.
Absolute Maximum Specifications
| Parameter | Min | Max | Units |
| Supply voltage | -0.3 | 3.6 | V |
| Data input voltage | -0.3 | 3.465 | V |
| Control input voltage | -0.3 | 4.0 | V |
| Damage Threshold | 3.4 | - | dBm |
Operational Specifications
| Parameter | Min | Typ | Max | Units | Notes |
| Supply voltage (Vcc) | 3.135 | 3.3 | 3.465 | V | - |
| Power consumption 200Gb/s end | - | 4.5 | 5.0 | W | - |
| Power consumption 100Gb/s end | - | 3.0 | 3.5 | W | - |
| Supply noise tolerance (10Hz - 10MHz) | 66 | - | - | mVpp | - |
| Operating case temperature | 0 | - | 70 |
°C
|
- |
| Operating relative humidity | 5 | - | 85 | % | - |
Electrical Specifications
| Parameter | Min | Typ | Max | Units |
| Signaling rate | -100ppm | 53.125 | +100ppm | GBd |
| Differential data input swing at TP1a | TBD | - | 900 | mVpp |
| Differential data output swing at TP4 | - | - | 900 | mVpp |
| Near-end ESMW | 0.265 | - | - | UI |
| Near-end output eye height | 70 | - | - | mVpp |
| Output transition time, 20% to 80% | 9.5 | - | - | ps |
Notes:
2. QSFP Tx CDR lock can only occur if Tx lane 4 is transmitting data.
Key Features:
200Gb/s QSFP56 to 2x100Gb/s QSFP56 data rate
4x 50Gb/s PAM4 modulation
Single 3.3V power supply
Up to 30m length
Hot pluggable
RoHS compliant
SFF-8636 compliant I2C management interface
Shenzhen Fibercoms Co., Ltd
Phone:
86-18692697905
Email:
[email protected]
Address:
Hubei road, Dongmen Street, Luohu District, Shenzhen, China
