[email protected]
86-18692697905
English
English
| Mellanox Compatible: | MFS1S50-V0xxE | Vendor Name: | Fibercoms | Form Factor: | QSFP56 to 2x QSFP56 |
| Max Data Rate: | 212.5Gb/s | Wavelength: | 850nm | Cable Length: | 3m-30m |
| Cable Type: | MMF | Jacket Material: | LSZH | Modulation Format: | PAM4 |
| DDM Support: | Yes | Voltage Supply: | 3.3V | Host Required: | FEC |
| Transmitter Type: | 850nm VCSEL | Receiver Type: | PIN | Operation Temperature: | 0 to 70°C (32 to 158°F) |
| Protocols: | QSFP56 MSA, CMIS IEEE 802.3cd 200GBASE-SR4 | Application: | 200G InfiniBand HDR | Warranty: | 3 Years |
The 200GbE QSFP56 to 2x100GbE QSFP56 Breakout active optical cable is designed for use in 200GbE Ethernet application systems. It provides a connection of a 200G QSFP56 port on one end and to two 100G QSFP56 ports on the other end. This cable provides power-efficient connectivity for data center interconnects. It is compliant with QSFP56 MSA, CMIS IEEE 802.3cd 200GBASE-SR4.
Absolute Maximum Specifications
| Parameter | Min | Max | Units |
| Supply voltage | -0.3 | 3.6 | V |
| Data input voltage | -0.3 | 3.465 | V |
| Control input voltage | -0.3 | 4.0 | V |
| Damage Threshold | 3.4 | - | dBm |
Operational Specifications
| Parameter | Min | Typ | Max | Units |
| Supply voltage (Vcc) | 3.135 | 3.3 | 3.465 | V |
| Power consumption 200GbE end | - | 4.5 | 5.0 | W |
| Power consumption 100GbE end | - | 3.0 | 3.5 | W |
| Supply noise tolerance (10Hz - 10MHz) | 66 | - | - | mVpp |
| Operating case temperature | 0 | - | 70 |
°C
|
| Operating relative humidity | 5 | - | 85 | % |
Electrical Specifications
| Parameter | Min | Typ | Max | Units |
| Signaling rate | -100ppm | 53.125 | +100ppm | GBd |
| Differential data input swing at TP1a | TBD | - | 900 | mVpp |
| Differential data output swing at TP4 | - | - | 900 | mVpp |
| Near-end ESMW | 0.265 | - | - | UI |
| Near-end output eye height | 70 | - | - | mVpp |
| Output transition time, 20% to 80% | 9.5 | - | - | ps |
Notes:
2. QSFP Tx CDR lock can only occur if Tx lane 4 is transmitting data.
Key Features:
200GbE to 2x 100GbE data rate
4x 50Gb/s PAM4 modulation
Single 3.3V power supply
Up to 30m Length
Hot pluggable
RoHS compliant
SFF-8636 compliant I2C management interface
Shenzhen Fibercoms Co., Ltd
Phone:
86-18692697905
Email:
[email protected]
Address:
Hubei road, Dongmen Street, Luohu District, Shenzhen, China
